How To Distinguish The Quality Of Plastic Molds

The first thing to look at is the mold material. Many customers know that the mold material must be determined with the manufacturer before placing the mold order. The choice of mold material is actually a choice of steel. The choice of steel is actually the choice of steel hardness and toughness. For the mold, the greater the hardness of the selected steel, the less likely to be worn during the production process, and the longer the service life. The longer the service life, the more products the mold can produce, which is a saving for plastic parts manufacturers.

Secondly, it depends on whether the mold is easy to break under normal production and maintenance, and it is often repaired.

Furthermore, check whether the produced product has flash edges, burrs, and whether the surface is smooth. There are flashes, burrs, and non-smooth ones are definitely not good. The injection molding manufacturer must arrange for someone to remove the flashes, which is a waste of time and manpower and material resources.

In addition, depending on how many molds can be shot per minute, that is, how long it takes for the mold to hit a mold, this is also the production cost of the injection molding manufacturer considered. If the mold is opened faster, the product produced in a specific time It can effectively save the production cost of injection molding manufacturers.