Development status and trend analysis of Chinese plastic mold industry in 2019
The scale of mold industry has been greatly improved
Mold, is used in a variety of presses and installed in the press on a special tool, and then through the pressure of metal or non-metallic materials into the required shape of parts or products. China's mold industry has experienced more than half a century after the development of the greater promotion, the development is very rapid. In 2018, the sales revenue of enterprises above the scale of mold industry in China was 213.616 billion yuan, down 19.8% compared with the previous year, but there was still a big increase compared with 2010.
In the past two years, the dramatic change of the market environment and the global economic depression have led to the decline of export mold, mold industry is facing greater challenges.But the mould is one of the most important footstones in the field of industry and plays a vital role in the manufacturing industry.Even highly industrialized developed countries cannot do without mold development.Although the current trough, but China's mold manufacturing has changed, the scale of the industry has been greatly improved, in the Internet information technology help, mold industry still has a good prospect for development.
2010-2018 sales revenue and growth rate of enterprises above the scale of mold industry in China (unit: 100 million yuan, %)
Mold industry accounted for 30% of the proportion
The development of mould industry has effectively promoted the rapid development of plastic mould industry.Since the new century, as a great invention, plastic products have been widely used by people and factories. Therefore, the injection mold processing industry has emerged along with the plastic industry.Plastic mold is an important branch of the current mold industry, accounting for about 30% of the entire mold industry.Because injection mold processing in plastic products has an important core position, it is also known as the "mother of industry".According to the international mould and hardware plastic industry suppliers association executive secretary luo baihui predicted that in the future mold market, plastic mold development rate will be higher than other mold, in the mold industry will continue to improve the proportion.
Market share of mold industry in China (unit: %)
Manufacturers are concentrated in the Yangtze river delta and the pearl river delta
At present, the characteristics of China's plastic mold industry region is obvious, that is, the southeast coastal areas developed faster than the central and western regions, the south developed faster than the north.Plastic mold production most concentrated in the pearl river delta and the Yangtze river delta region, accounting for about two-thirds of the national plastic mold output value.Among them, zhejiang, jiangsu, guangdong plastic mold is located in the forefront of the country, its output value in the national total output value of the mold ratio reached 70%, has a strong regional advantage.
Wide range of applications
Plastic mold is widely used in automobile, energy, machinery, electronics, information, aerospace industry and daily necessities.According to statistics, 75% of the rough processing industrial product parts, 50% of the precision processing parts by the mold molding, household appliances industry 80% of the parts, mechanical and electrical industry more than 70% of the parts also need to go through the mold processing.In the future, with the rapid development of China's machinery, automobile, home appliances, electronic information and building materials and other national economic pillar industries, China's plastic mold industry scale will continue to grow.
The shortage of talents is serious
In recent decades, the rapid development of domestic plastic mold industry, the thirst for talent and requirements are increasingly high.But domestic still cannot solve this thorny problem, became the main obstacle that Chinese mould industry develops.Coastal area mold production area, there are different degrees of recruitment.
At present, 3 kinds of talents constitute the plastic mold industry."Gold collar layer" personnel proficient in mold design software and mold structure knowledge, in the actual work has accumulated a lot of practical experience this person is very suitable for the role of the enterprise's technical director or technical supervisor."Gray collar layer" refers to the personnel who specially design and process molds on the post, which accounts for 15% in the enterprise mold technical post."Blue-collar layer" refers to the technical staff who are responsible for the specific operation and daily maintenance of molds in the production position, accounting for 75% of the positions in the enterprise, which is the biggest demand at present.Talent shortage has become one of the main obstacles in domestic mold industry.
Though plastic mould industry is developing rapidly in China, but much of the design idea, injection mold processing manufacturing process also need reference of foreign experience, therefore, China needs to integrating in the present research level on the basis of other advanced technology, further strengthen the innovation of the injection mold processing, create more economic benefits.
The above data analysis is from the "China plastic mold industry development prospects forecast and transformation and upgrading analysis report" issued by qianzhan industry research institute.