Tooling mould plastic mold, Electronic Plastic Parts Mold, Plastic injection molding

Tooling mould plastic mold, Electronic Plastic Parts Mold, Plastic injection molding
Tooling mould plastic mold, Electronic Plastic Parts Mold, Plastic injection molding
Tooling mould plastic mold, Electronic Plastic Parts Mold, Plastic injection molding

Service Details:

  • Brand:Kayou
  • Serial Number: M-0016
  • Country of Origin:Shenzhen, China
  • Certificate:IS9001

Payment & Shipping Terms:

  • Price Quote:$1,000-100,000/set
  • Minimum Order: 1 set
  • Average Delivery Time:25 days
  • Payment Method:T/T
  • Package Details:Wooden case
  • Ability to Supply:5 set/per month
Contact Us

Tooling mould plastic mold, Electronic Plastic Parts Mold

Description

LED energy-saving lamp holder injection mold The structural elements to be considered in PBT processing design include parting surface, structural part, mold precision, and pouring system. among them. The parting surface only refers to the contact surface where the die and the punch cooperate with each other when the mold is closed. So, what problems do we need to pay attention to when selecting the parting surface?

1. The mold casting should be taken out of the cavity smoothly at the largest section of the outline of the die casting.

2. The surface quality and appearance requirements of the casting and the accuracy of the dimensional shape should be guaranteed.

3, the parting surface should be beneficial to the exhaust and also to prevent overflow.

4. It should facilitate the processing of the mold and simplify its structure.

 

Tooling mould plastic mold, Electronic Plastic Parts Mold

Mold design important project
1. Multi-color injection combination
2. Sprue system
(1) The injection pressure is low.
(2) The rapid filling is completed, which can increase the output.
(3) It can be evenly shot and the product quality is good.
(4) Reduce waste and shorten injection time.
3. Molding equipment:
(1) The amount of shot from each shot cylinder determines which one is used for that color.
(2) The position of the striker and the strike stroke.
(3) The problem of waterway, oil circuit, and circuit configuration on the rotating disk.
(4) The weight of the rotating disk.
4. Mold base design: mold configuration design
First, it is considered that the mold male side must be rotated by 180 degrees, and the mold set must be arranged in a cross-symmetric manner, otherwise the mold cannot be formed.
(1) Guide column: It has the function of guiding the male mold and the female mold. It is necessary to maintain the concentricity in the multi-color mold.
(2) Return pin: Since the mold must rotate, it is necessary to fix the ejector plate and add a spring on the return pin to keep the ejector plate stable.
(3) Positioning block: Ensure that the two mold bases are not fixed due to the gap problem of the screws when they are fixed to the large solid plate.
(4) Adjustment block (wear block): It can be adjusted mainly when the mold height height z coordinate value error is used during mold clamping.
(5) Ejection mechanism: The design of the ejection mode is the same as that of the general mold.
(6) Cooling circuit design: The cooling circuit design of the mold one and the mold two is as much as possible.

 

 

Tooling mould plastic mold,


Plsatic mold and Injection Part

 

Electronic Plastic Parts Mould

If you are interested in our company,please visit kayoumold.channelwill.com

Electronic Plastic Parts Mould

 

 

Plastic Injection Mold Show

moldmouldinjection moldinjection moludinjection moldinginjection mouldingplastic injection moldplastic injection mouldplastic injection moulding

 

 

 

Plastic Part Show

plastic injection moldingplastic injection mouldingplastic part injection moldplastic part injection moldingplastic part injection mouldplastic part injection mouldplastic part injection mouldingplastic injection mold productplastic injection mould product

 

 

 

Factory Show

plastic injection molding productplastic injection moulding productinjection moulding productioninjection molding productioninjection mould productioninjection mold productioninjection plastic moldinjection plastic mouldinjection plastic molding

 

 

FAQ

1.If I have a new product, can you help me with this project from design to production?

Yes, we can. And we will strictly abide by the confidentiality agreement.

2.What information do I need to provide in order to get a precise quote?

3D drawing, material, quantity, cavity...

3.Tooling mould plastic mold, Electronic Plastic Parts Mold is one of our core business.

 

 

Related Services:

Get in Touch with us

Still have Questions

Our Headquarters

Work Time :
8:30-18:00(Beijing time)
FAX :
86-7552-3156569
Business Phone :
86-7552-3156569(Working time)
Factory Address :
E bulding 220th Reixing industrial Park XingYe Road Wusha ChangAn GuangDong provice China

Send Us an Email

contact us