Plastic Injection Mold Automotive Part, injection mold/molding

Plastic Injection Mold Automotive Part, injection mold/molding

Service Details:

  • Brand:Kayou
  • Serial Number: M-003
  • Country of Origin:Shenzhen, China
  • Certificate:ISO9001

Payment & Shipping Terms:

  • Price Quote:$1,000-$100,000
  • Minimum Order: 1 set
  • Average Delivery Time:25days
  • Payment Method:T/T
  • Package Details:Wooden box
  • Ability to Supply:5/pre month
Contact Us

Plastic Injection Mold Automotive Part, injection mold/molding

Description

Processing of Mold Components
Because the components of the die base are basically purchased parts, their processing methods are not described in detail here. Following is an introduction to the working parts of the die, such as the cavity die, the supporting machine and the line position.
Internal die processing:
1) The internal model is divided into the core part of the cavity. No matter the shape is simple and complex, a reference plane must be established first.
2) Choosing the appropriate location
Set the base angle on the parting surface angle near the side of the upper and lower dies, which has been marked with die numbers and materials, so as to guide the future processing or frame entry.
3) Use a file to mark the notch on one corner near the side of the marked die and material. Pay attention to the correct arrangement of the code of the die under the notch.
4) Scribing and Dividing
The central point is delineated according to the drawing or material requirements.
5) According to the requirements of drawings or data, rough processing by lathe or Gong industry is used, and a certain amount of processing allowance is left according to drawings or data, so that the required shape and size can be processed eventually.
6) Finishing
For simple cavity and core, 0.05 mm of polishing allowance can be reserved during milling, and the required cavity can be obtained by benchwork polishing. For complex shape cavity and core, gong machine processing can only be used as an intermediate processing process, and after gong, EDM and other methods are needed for finishing.

   For the internal die, the following work is needed immediately after the forming level part is processed:
Grinding ruler and frame. After forming the internal die, fit the fractal surface first, and select the appropriate position to make the screw hole according to the data of the layout map.
After tightening the screw, check whether there will be displacement on the four sides, measure the internal model height, compare the required height of the rear model, and write down the remaining amount of gong. If the head of the screw cup is in the rear model, the countersunk hole should be drilled correspondingly, and if it is in the right position, smooth the face.
     

       

Plastic Injection Mold

Plastic Injection Mold Automotive Part, injection mold/molding

 

Plastic Injection Mold Show

moldmouldinjection moldinjection moludinjection moldinginjection mouldingplastic injection moldplastic injection mouldplastic injection moulding

 

 

 

Plastic Part Show

plastic injection moldingplastic injection mouldingplastic part injection moldplastic part injection moldingplastic part injection mouldplastic part injection mouldplastic part injection mouldingplastic injection mold productplastic injection mould product

 

 

 

Factory Show

plastic injection molding productplastic injection moulding productinjection moulding productioninjection molding productioninjection mould productioninjection mold productioninjection plastic moldinjection plastic mouldinjection plastic molding

 

 

FAQ

1.What materials do you usually use to make molds?

Nak80, IMPAX 718H, NIMAX, S136(STAVAX ESR), S136H , IMPAX 718H, DIEVAR 8418, ORVAR 8407, LKM P20M, LKM2311, LKM2312, LKM738, LKM2343, LKM2343 ESR, LKM2344, LKM2344 ESR

2.Can we make the test mould before making the mould formally?

Yes. Guests often do this, but they have to pay for the test mould.

3.Can you recommend which kind of material to make the mould according to the quantity of the product and control the cost?

We are committed to providing the best solution according to the requirements of our customers and providing satisfactory services to our customers.

4.Can you make Prototype?

Yes, of course we can. All customized manufacturing from prototype to production.

 

Plastic Injection Mold Automotive Part, injection mold/molding

 

Related Services:

Get in Touch with us

Still have Questions

Our Headquarters

Work Time :
8:30-18:00(Beijing time)
FAX :
86-7552-3156569
Business Phone :
86-7552-3156569(Working time)
Factory Address :
E bulding 220th Reixing industrial Park XingYe Road Wusha ChangAn GuangDong provice China

Send Us an Email

contact us